VACUUM THERAPY HYPERMID

The “FAPSCO” vacuum therapy device creates a constant and controlled negative pressure from 0 to 200 mmHg. By using foam and creating a closed vacuum environment with the help of adhesive transparent film dressing and drain tube with a microprocessor system, the negative pressure is transferred to the wound surface, the number of bacteria is controlled, and then the wound secretions are collected in the  canister attached to the device; using such a technology, this device accelerates the healing of acute and chronic wounds.

Equipped with painless system in all working modes
Web-based control panel (T-MUTE)
300 cc canister capacity
Product Specifications
Technology used in the product
Electronic board
Product Readiness Level (TRL)
It has export potential
Competitive advantage of the product
It has a high competitive advantage
The standard used in construction
yes
Product features
Two modes of operation: continuous and intermittent
Product manufacturer
Knowledge-based license
Export capability
Product introduction

The “FAPSCO” vacuum therapy device creates a constant and controlled negative pressure from 0 to 200 mmHg. By using foam and creating a closed vacuum environment with the help of adhesive transparent film dressing and drain tube with a microprocessor system, the negative pressure is transferred to the wound surface, the number of bacteria is controlled, and then the wound secretions are collected in the  canister attached to the device; using such a technology, this device accelerates the healing of acute and chronic wounds.

• Device Modes:
1. Continuous Mode: Firstly, the pump is turned on and   immediately brings the negative pressure of the wound bed to the amount set by the user; then due to the pain-free mechanism used in this mode, the patient does not feel any pain since the very beginning.

2. Intermittent Mode: The device first brings the negative pressure to the maximum level set by the user and then based on the selected time returns to the rest mode. In this case too, with high-speed healing, the patient does not feel pain.

3. Dynamic Mode: This mode is the advanced Intermittent mode. In this case, the pump applies constant negative cycles of negative pressure to the wound bed. Due to the reduction of contraction and expansion of the foam, the patient does not experience any pain.

4. Advance Dynamics Mode: This mode is an advanced model of dynamic mode. In this mode, the combination of continuous and dynamic mode is adjusted by the user and then applied on the wound bed. This method is more effective and applicable for various wounds.

• Device Features:
1. Polyurethane Foam: The foam is made of polyurethane with open pores in different sizes; Being anti-allergenic, non-adhesive, and biocompatible, this foam with the same distribution of negative pressure on the wound bed encourages to the growth of granulated tissues and the release of secretions.

2.
– Equipped with an application for remote control recording patient files
– Equipped with tracking and management system for device and patient treatment
– Wound image processing
– Checking the authenticity of the device, accessories, doctors and therapists
– Equipped with a system for sending leakage, blockage, etc. notifications.

Features:

  1. Two modes of operation: continuous and intermittent
  2. Equipped with a system for sending alerts and instant troubleshooting; Leakage, Low battery, Canister Detecting and Canister Filling warning
  3. Equipped with painless system in all working modes
  4. Web-based control panel (T-MUTE)
  5. 300 cc canister capacity
  6. 8-hour battery life
  7. 3.2 inch touch LCD
  8. Device dimensions: 18*15*8 cm
Manufacturer/provider contact information
Mobile
+989133081431_+989129346190
Phone
+983133932014_18
Fax
+983133932019
Email
info@fanavarco.com
Website
www.fanavarco.com/en
Whatsapp
+989133081431_+989129346190
Telegram
+989133081431_+989129346190
Office address

central office: Islamic Republic of Iran - Isfahan province - Isfahan - Isfahan University of Technology - Science and & Technology Town (ISTT) - Sanat blvd. - No. 10 St. - B404

Tehran office: Islamic Republic Of Iran - Tehran Province - Tehran - Khoramshahr St. - Arabali St. - No. 7 St. - No.7

Our location on the map
Specialized product licenses and approvals
There is no certificate...
Approvals and licenses obtained for the export of this product
There is no certificate...
Customer list of this product
There is no customer...
Other manufacturer products
Full jar with gap
Unbreakable suction
jar with autoclave
capability to store secretions
MICRONEEDLING FAPSMED N
Installing a pedal for turn...
Isolated, disposable and st...
Non-vibrant and quiet
MICROPIGMENTATION FAPSMED P
Tattoo removal
Facial skin rejuvenation an...
corneal micropigmentation (...
ANALOG MICRODERMABRASION DH
a treatment fo Acne and min...
Facial Layer removing
Localized slimness
DIGITAL MICRODERMABRASION DH
a treatment fo Acne and min...
Facial Layer removing
Localized slimness
VACUUMED AS
Low weight and portable
Antibacterial filter
Polycarbonat suction jar
VACUUMED HS
Low weight and portabel
Antibacterial filter
Polycarbonat suction jar
VACUUMED DSI
Polycarbonat suction jar
Antibacterial filter
Battery (option)
VACUUM THERAPY VACUUMED V.A.C
500 cc canister capacity pl...
2-hour battery life
Equipped with alarm system ...
VACUUM THERAPY HYPER 3
750 cc canister capacity
6-hour battery life
Equipped with tracking syst...