Measuring the level of solid and powder materials in order to estimate the inventory is one of the challenges of solid material tanks such as silos. Due to the fact that in these tanks, the materials are not placed in a uniform shape and often have a conical shape (facing up or down), to estimate the inventory of the tank, it is necessary to draw this asymmetrical and non-uniform shape so that the materials in it can be drawn. Calculate the tank. The 3D laser scanner with two degrees of freedom in the Pan and Tilt axes scans the surface of the material inside the tank and measures the distance between the points on the material and the roof of the tank with an accuracy of 1 mm. This device easily measures distances of up to 100 meters in harsh conditions such as the presence of dust, suspended particles, great depth and uneven surfaces with an accuracy of one millimeter. The device produced by Rah Sabz Chehelston uses a 650 nm laser (red visible light) for distance measurement.
اندازهگیری سطح مواد جامد و پودری به منظور تخمین موجودی، یکی از چالشهای مخازن مواد جامد مانند سیلوهاست. با توجه به این که در این مخازن مواد به شکل یکنواخت قرار نمیگیرند و غالبا شکل مخروطی (رو به بالا یا رو به پایین) دارند، برای تخمین موجودی مخزن نیاز است که این شکل نامتقارن و غیریکنواخت را ترسیم کرد تا بتوان مواد موجود در آن مخزن را محاسبه کرد. دستگاه اسکنر سه بعدی لیزری با داشتن دو درجه آزادی در محورهای Pan و Tilt اقدام به اسکن سطح مواد داخل مخزن کرده و با دقت ۱ میلیمتر فاصله نقاط روی مواد را تا سقف مخزن اندازه گیری میکند. این دستگاه در شرایط سخت مانند وجود گردوغبار، وجود ذرات معلق، عمق زیاد و سطوح ناهموار فاصلههای تا ۱۰۰ متر را با دقت یک میلیمتر به راحتی اندازهگیری میکند. دستگاه تولید شده توسط شرکت راه سبز چهلستون از لیزر ۶۵۰ نانومتری (نور مرئی قرمز) برای فاصلهیابی استفاده میکند.
Device model | RS-ACL-3D-100-1S-8000 |
Measuring range | 0.01 to 100 meters |
Accuracy | ±1 mm |
Laser beam | 650 nm visible light laser |
Body Material | aluminium |
environment temperature | -20 to 40 degrees Celsius |
Operating pressure | Atmosphere |
Output signal | Modbus TCP/IP |
standards | IP65 Ex ta |
benefits
Support Modbus TCP/IP protocol to send and receive data
It has Ex ta and IP66 standards
Using the PoE method to supply the required power of the device
Can be used in tanks of acidic, alkaline, corrosive, powdery and multiphase solids
Can be used in tanks containing solid and powder materials
Long life and very low maintenance cost
One year warranty and 10 years after-sales service